japanese facades TORAY

TORAY Industries – is a Japanese corporation that has been manufacturing carbon fiber reinforced plastic (carbon fiber) and heavy-duty coatings since 1926. The glasses of all iPhones are covered with a protective transparent coating made of TORAY materials.

The company also manufactures facade panels.
Сombining colossal technical resources, TORAY has created the most modern panels with a self-cleaning function. The company's engineers have developed a unique transparent hybrid F-coating with three protective features: self-cleaning of the facade panel from dirt and dust, protection from ultraviolet radiation, protection from mechanical damage from scratches and sand.

TORAY fiber cement facade panels are so strong that they are ready to withstand the extreme loads that are possible during earthquakes. There are photocatalysts in the hybrid protective layer of the panel, thanks to which the panels perform a similar function to the leaves of trees - they break down CO2 molecules into oxygen and carbon. So, the facade of one building with TORAY panels replaces a grove of trees.

Japanese panels fully justify their price - they do not require maintenance after installation for decades, do not fade or change color under the influence of solar UV radiation.

ADVANTAGES OF JAPANESE FACADE PANELS TORAY

Strong and durable
At the core of the panel is a 16mm thick fiber cement board without empty cavities and pores. This panel is denser than similar Japanese ones. The hybrid coating protects the color from fading and chalking.
Effective
Japanese Toray facades are installed according to the principle of a hinged ventilated facade. On the lathing. On frame buildings and buildings made of SIP panels, installation takes place directly on the wall, using special wide cleats that provide a ventilation gap. The ventilated façade creates air circulation between the insulation and the Japanese façade panel. The insulation always stays dry, which means effective.
Original textures
Japanese facades tend to have deep, striking textures. Your façade will be different from the smooth slabs or tiles that you are used to see. Although in 2020, smooth textures "like concrete" appeared.
Completely environmentally friendly and weatherproof
They do not contain harmful substances and carcinogens. Polypropylene reinforcing fiber is used as fiber in TORAY panels in a small percentage to the basic composition. Other manufacturers of Japanese panels use dried wood fractions in the form of shavings or cellulose with a percentage of up to 30-40%. Naturally, such a high wood content in the panel reduces its cost, but negatively affects the quality. Such panels can swell or exfoliate when exposed to water, are poorly resistant to freezing and thawing, and to wind loads. Therefore, other manufacturers prohibit the use of panels close to damp ground and put forward a number of requirements for the facade for normal functioning. TORAY panels do not have the above disadvantages.
Japanese panels are earthquake resistant
Initially, the panels were developed for earthquake-prone Japan, and they also proved to be excellent in Ukraine. Thanks to strong intermolecular bonds, the TORAY panel withstands vibration loads both during clamping and through fastening. Chips and cracks are not formed in the attachment points. When the building shrinks, the panels also remain intact due to the "floating" clamping pattern and the strength of the panel itself. The panels are easily dismantled for repair or replacement.
Non-flammable
Non-combustible panels - class NG. We have a very specific GOST 30244-94, which confirms the flammability of materials. No plastics, even very modern ones, can be non-flammable. Check the flammability class carefully, request material test reports.
Strong and solid
Unlike many other materials, including fiber cement, Japanese Torai panels are nano-ceramic coated. This coating protects the surface layer of the panel from impacts, dust, sand and other mechanical influences.

TECHNICAL FEATURES OF JAPANESE FACADE PANELS TORAY

— panel thickness: 16mm
— panel size: 455 * 3030mm
— weight of one panel: 26kg
— the area of one panel is 1.38 m2
— weight of 1m2 panel: 18.85kg
— flammability group: NG (non-flammable)
— sound absorption coefficient 40dB
— coefficient of thermal conductivity 0.12 kW / m * K
— frost resistance: more than 150 cycles

INSTALLATION OF JAPANESE FACADES TORAY

TORAY facade panels are installed on a metal subsystem. According to the strength of the walls, the material from which the building is built, as well as its height, a suitable anchor is selected. The metal frame is made of galvanized steel or aluminum profile. When assembling a double-circuit metal subsystem, brackets are mounted on the walls of the building using anchors, to which horizontal metal profiles are attached. Then a heater with a waterproofing membrane is installed. After that, the vertical profiles are mounted. With a single-circuit subsystem scheme, a vertical profile is mounted on the bracket at once.

TORAY facade panels can be installed at any time of the year. Before starting the installation, the lower ebb is installed on the lower part of the facade system, and then the starting bar. There are holes in the starter bar for drainage of water, which accumulates in the groove of the starter profile.

TORAY panels are attached to the starter bar. For installation of panels, hidden clamping is used - cleats with lower and upper fixing elements. The cleats are attached to the subsystem at a distance of 40 cm from each other using self-tapping screws. When installing TORAY facade panels, there is no need to drill the siding. On the upper end of the bottom panel there is a full-length ledge that tightly fits with the counterpart of the top panel in the form of a groove with a seal. Vertical joints are filled with a special sealant to match the color of the siding. With the help of such a connection, the tightness of the outer part of the curtain facade is ensured, the penetration of rainwater into the facade becomes impossible.

TO BUY JAPANESE FACADES IN UKRAINE AND KYIV

The KMD company exclusively represents the interests of the TORAY company in Ukraine. You can buy TORAY panels from a warehouse in Kiev, and to order. The delivery time for Japanese siding depends on the texture. We deliver items from the warehouse by our own transport or carriers in Ukraine. Items under the order arrive in Ukraine within 2-3 months. Usually, this time is enough to prepare the substructure on the facade and carry out the insulation.
We form a dealer network in Ukraine. Our goal is to provide the customer with the opportunity to buy a Japanese facade from a warehouse in Dnipro, Odessa, Lviv, Kharkiv and other cities.
CALL LIDIA NOW TO FIND OUT MORE

KMD FACADE FIXING AND GLAZING SYSTEMS

KMD FACADE SOLUTIONS, LLC
IS THE LEADER IN THE MODERN FACADE SYSTEMS MARKET IN UKRAINE

© 2017–2020, KMD FAСADE SOLUTIONS
Facade systems: facade glazing systems, ventilated facade fixing systems
made by
RU
UA